1 . Single Coat
( Supreme ) , Single Coat ( Premium )
Single
Coat products are specially formulated gypsum plaster,
which can be hand applied over any normal walls/solid
backgrounds, in single application in normal thickness.
Good surface finish & good impact strength are
its unique properties. Single Coat Supreme is a
calcium sulphate hemi hydrate gypsum plaster with
additives including light weight aggregate. It attains
early strength & does not suffer from inherent
shrinkage cracks. It sets hard in a matter of hours
& attains maximum strength & bonding on
drying.
Two varieties are available as Single Coat (Supreme)
and Single Coat (premium). These are recommended
to be used depending upon the type of background.
These are specially formulated to suit Indian climatic
/ site working conditions. The in built unique properties
are, :
1.Low Density Higher Coverage
: Its density is low to provide
better coverage maintaining its all in built properties.
The coverage of Single Coat (Supreme) is app.62
m2/(metric ton) in normal 12 mm thickness, whereas
the coverage of Single Coat (premium) is app, 65
m2/(metric ton).
2. Gradual Setting With No Shrinkage Cracks
: Once plaster attains
strength, it does not suffer from inherent shrinkage
cracks. The setting time of plaster is app. 10-15
minutes, after mixing with water. The setting progresses
evenly & gradually until the surface is hard
enough to receive a final stroke of trowel, at app
20-25 minutes.
3. No Water Curing Required
: Plaster does nor require any water curing
after the application, thus saves time, water consumption
& manpower. This helps to complete project faster.
4. Strong Bonding & Good Strength
: It sets hard in a matter of hours, to
ensure continuity of work. Also it attains maximum
strength on drying. After it is completely dry,
it also attains strong bonding with most solid backgrounds.
5. Easy Workability
: It has been formulated for easy to mix,
to be spread & applied by normal POP workers
by normal hand application prevailing practice,
in trade.
6. Thickness
: The thickness of plaster is recommended
to be 12 mm on uneven background but should not
exceed 10 mm on level & even background. If
thickness is more than 12 mm, it should be applied
in two subsequent applications.
7. In Built Properties
: Plaster is non-combustible having very
low thermal conductivity (k-value). Thus lends good
thermal insulation to w.aJls / surface.
|
2 . Surface Finishing Plaster
Surface
Finishing Plaster is specially formulated plaster
for thin surface finishing coat application on level
or already Plaster surface. It provides silky smooth,
hard but durable surface. It resists abrasions &
cracking and dries faster to allow ea decoration.
It is easier to apply trowel in 6 mm thickness.
It is easy to mix & apply. Surface Finishing
Plaster is manufactured fn calcium sulphate hemi
hydrate gypsum with additives to enhance properties
for easy spread ability & better workability.
It's inbl unique properties include :
1. Strong Bonding With No Shrinkage Cracks
: It attains early strength &
provides controlled gradual set & is free from
shrinkage cracks.
2. Low Density Higher Coverage
: It is having low density to provide higher
coverage,
3. Hard Surface & Good Impact Strength
: It provides silky smooth hard
surface & good impact strength & strong
bonding with background.
4. No Water Curing
: It does not require water curing
thus saves labour, time & consumption of. water,
helps to complete project faster.
5. Easy Mix, Spread & Apply
: It has been formulated for easy but improved
workability.
6. Thickness
: Ideal thickness of plaster recommended
to be 6 mm but should not exceed 10 mm on any solid
background. thickness of plaster to be applied is
higher & more than 10 mm, it should be done
in two applications.
7. Setting Time
: of Plaster is app. 8-10 minutes, after
mixing with water. The setting progresses evenly
& gradually until the surface is hard enough
to receive a final stroke of trowel, at app 15-20
mints.
8. Its coverage is app. 2.5 m2, per Bag,
in 6 mm thickness.
9.In Built Properties
: Plaster is non combustible having
very low thermal conductivity (k-value). Thus lends
good thern
insulation to walls / surfaces.
|
3 . SUPER
TUFF
SUPER
TUFF is quality adhesive compound/Wall Dressing
made with quality synthetic resin binder. It is
blended with superfine fillers, creating ready
to use plaster. It acts as an adhesive compound
for prefab cement sheet partitions, finishing
coat for preparing interior walls before painting
and eliminating the use of primers, neeru &
putty made on sites.
SUPER TUFF is Pre-mixed, in paste form, ready
to use as joining compound /Wall Dressing with
solid binding & consistency in a very smooth
and lustrous perfect finish. selected superfine
fillers blended with synthetic binders and preservatives,
make the product once set solid like stone. When
spread on any smooth surface it will make surface
more resistant to cracks, peeling & making
it free from deterioration for years.
On this ready surface, all water based paints
or solvent based matt & luster paints can
be applied without any primer on this SUPER TUFF
surface.
AREA OF APPLICATION
Super Tuff can be directly applied on
1.Smooth sand cement and lime plasters.
2.Pre-cast concrete.
3.Plywood & asbestos cement sheets as Joining
filler.
4. Partition panels made out of ac sheet with
foam concrete as binder between the panel
5. False ceiling Joint.
METHODS OF APPLICATION
1. Use painter's putty knife or mason's
trowel.
2. Make sure that surfaces are absolutely
dry and set completely.Clean bits, ribs and loose
materials before application.
3. Minimum thickness of about 0.1mm must
be achieved for covering the Surfaces fully per
coats may be used to build up thickness for perfect
leveling.
4. Dries in 3 hrs. for brubbing and painting.
Rub with fine emery, wipe the residual dust with
a soft cloth. The wallisurface is ready for painting.
5. if material is too thick, a little water can
be added to bring it to a workable primer.
6. No primers required. Over coating can be done
with distempers, plastic emulsionpaints and solvent
based matt and luster paints. For glossy enamel
paints use one coat of Alkali resistant primer.
COVERAGE
Super Tuff is basically a leveling and smoothing
material and should note be confused with the
spreading and coverage of paints. The material
consumption varies drastically depending on the
contours of the surface and thickness of material
applied.
On normal smooth wall/plywood surfaces coating
of 0.6 to 1.00 mm thickness is sufficient for
optimum leveling and covering.
i.e., 1.65 kglmm/metre = 15 sq. mtr per 25 kg
bag or 160sft for 1 mm thick finish.
STORAGE STABILITY
Minimum 6 months in un-opened conditions.
Unused bags should be Stored in a cool dry place.
Partly used material bags should be tied properly.
Available in 25 kgs HDPE woven bags.
Appearance : Thick paste, ready
to use
Colour : marble white
Finish : Super smooth
Dry Coat Thickness : O.6-1mm
per coat.
Storage Period : Up to 6 months
for unopened bags.
Application Areas:
Sand-cement plaster surfaces, cement sheets partition
panels, false ceiling Panels or any other smooth
surface as joint fillers.
Packing : 25 kgs. |
|
